[MusoPro]

Hi All,
I just moved up from using a Canopus ADVC-100 to the Mojo.
The first thing I noticed is you can't record from DV into PT directly but only through an analog signal.
I recieve a lot on Beta but nowadays even more on DV. I guess that means you have to use Avid Free which doesn't work on "Tiger"
or buy Avid Express.

Anyway I have been able to record with no problem using the S- Video in on the Mojo from the beta with Sync I/O online.

I hooked up to an external monitor directly through the composite out on the Mojo and also set the output in PT to the same.
Well no picture. In the PDF provided it says you can do that. But the the PDF download on the Digi site it say either you must run it through a video deck first or use the componet cables which I didn't buy. Why? Because I only use the video for mixing and sync.
I then lay the sound back onto the master tape. So I figured I wouldn't need a top grade picture.

Yes, I have a seperate fire wire card for the Mojo

What am I doing wrong?

As always I would really appreciate the help.

Mitch

G5 Dual 2.0 2GB Ram
3 Seagate Firewire Drives

Mac OSX 10.3.9
PT 6.9.1
HD2 Accel
Sync I/O
96 I/O
MIDI I/O
C24
Digi Translator 2
Machine Control
Avid Mojo
Surround Setup