[pete_b]

Thanks for checking the logs Eddie.

Just tried reinstalling EuControl. Used the latest version 2021.6.1.7 from the Avid website. Problem still remained unfortunately.

This time, the left-hand most S1 fader physically 'stuck' at about -30, whilst the corresponding Pro Tools software fader was happily fading up and down following automation whilst Pro Tools was playing (and the audio correctly followed).

I noticed that the OLED display above the fader on the S1 was permanently showing the level in dB (and this was going up and down, following the automation). However, normally the level is only displayed whilst physically touching a fader (and for a few seconds afterwards).

I am now wondering if this is a hardware issue with the first fader on my S1?