Re: Firewire led on front panel is red!!!!
You can try to fix it yourself or send your unit to Digidesign for service (which you have to do anyway if the self-fix does not work). It is easy if you have a screwdriver
1) remove all cables and open the case
2) locate the power harness cable: it is the one that has multiple wires going from the power supply to both digital and analog boards.
3) re-seat the white plastic connectors even though they appear to be connected
4) close the case and power up
Hopefully it works; however it will likely break again at some point.
__________________
Janne
What we do in life, echoes in eternity.
|