View Single Post
  #1  
Old 08-27-2001, 01:27 PM
jackruston jackruston is offline
Member
 
Join Date: Jul 2001
Location: Wimbledon UK
Posts: 497
Default Re: Help: Setting up External devices

Not sure what an mx1 is but this is how you could do a stereo fx processor. Connect a pair of outs say 7+8 to the L and R in of your processor. Then connect L and R out of the processor to inputs 7+8. Now label the ins and outs for convenience. Create a stereo auxilliary in and make it's input interface 7+8 (or whatever label you've used) make the output output1+2. On each channel you want to effect, set up a send to 7+8 and and bring the send fader up. The reverb will come back in on the aux in. Make sure the processor is set to mix 100% wet and adjust the level of the reverb with the send fader or the aux in fader. You'll find this works as an insert if you select it.
Good luck
Jack
Reply With Quote