View Single Post
  #11  
Old 07-11-2021, 10:13 PM
DC-Choppah's Avatar
DC-Choppah DC-Choppah is offline
Member
 
Join Date: Jul 2010
Location: Washington DC
Posts: 401
Default Re: Please help with 'Cannot initialize device...' when hitting play

Restarting does not fix.

The ONLY thing that fixes this is to Create a new blank session at the desired sample rate in ProTools, close it and then fire up the desired session. That always works.

The Tascam appears to not do any initialization itself. It needs what ever happens in Protools when you create a new session to initialize the device. Protools is NOT the problem, the problem is the Tascam.

I can power the Tascam off, power off the PC and then boot up the PC. Then turn on the Tascam. At this point we would think the Tascam has been initialized. But negative. The Tascam says it is set to 41.4 KHz. I fire up a session in Protools at 44.1 KHz and Protools says that it cannot initialize the audio driver.

I create a new session in PT and close it, then fire up the real session and it plays fine. The sample rate is a red herring. The problem is that the Tascam can't be initialized, even after powering down.

Changing sample rate requires a re-initialization, but the unit doesn't do it by itself, even after powering down.

So whatever PT does differently during a 'create new session' vs an 'open session' initializes the Tascam. The Tascam does not appear to initialize itself even if you shut it off and turn it back on?!? It is in the same 'unable to initialize' state.
__________________
DC-Choppah's Project Studio:

ASUS PRIME Z390-A / Intel i7 rackmount PC
Windows 10 home 64 bit
Pro-Tools 11.3.1
AIR Instrument Expansion Pack v2
WAVES Platinum plugin bundle
Tascam US-16x08 Interface
100% Analog real time monitoring 16x4
Yamaha 16 channel MG16XU Analog Monitor Mixer
Yamaha MX-88 / Novation XiO keyboards
Mackie 4-channel headphone amp
Adam A8X monitors
Blue / Shure, etc. microphones

Estonia 6' 8" Parlor Grand Piano
Yamaha Studio Drum kit

https://www.dc-choppah.com/
Reply With Quote