Quote:
Originally Posted by BScout
Go to DAD's site and you can download the Dante firmware update from their support portal.
https://www.digitalaudiosupport.com/...ware-firmware/
You can create a free account to reach the download page.
For some Dante hardware, Dante controller is the way to do it. The MTRX/DAD don't appear in that updater however and you have to get the Dante Firmware Update Manager (current version 3.10.5.1)
The other thing, there hasn't been a Dante firmware update for the MTRX in a long, long time. So you are probably good. (But yes, you should keep the Dante and DADman/MTRX firmwares up-to-date to matching versions when doing hardware firmware updates). You can check the Dante firmware from the lower section of versions in DADman>Device List.
The current firmware is actually 1.0.2.1 (That's what you should see for firmware). v4.0.9.1 is the installation package -- not the firmware itself.
Screenshot of DAD's site with versions:
|
Thanks for the info. I updated the Dante Controller to the latest version and launching the Dante Updater which is installed along Dante Controller, showed that the MTRX Dante card (64 channels) was up to date on their update device list. All is working fine, but IŽll check the versions with your info.
Have a good weekend.
PS (edit)Actually the Dante firmware file for the Brooklyn II card showed up on the downloads of our AVID account, alonside the MTRX firmware update, hence my doubt. ThereŽs nothing on the MTRX manual that shows how to update the Dante firmware.