Quote:
Quote:
I hate to say it but I run the HP out from my 002 into a Behringer 4700 and it sounds fine as long as its below 12 o'clock. Then I use aux outs to add "more me" to any of the 4 sections.
|
Sure it will sound fine, but why not use a line out?
|
agreed, using a line out would eliminate wiring the aux outs for the more me factor, you'd simply dial up whatever you wante dto hear in each mix off the aux, end of story. Less cabling, less to go wrong.
Also, think about what you said, you ahve ot keep the HP out below 50% to keep it from distorting. there's a reason for that. Also, if you use a line out, I guarantee you'd notice a significant increase in the signal quality.