[Darryl Ramm]

Have you looked at the relevant section in the user guide? If something there is not making sense then ask about that.

The setup is basically no different than any other outboard S/PDIF or AES/EBU box. If you want to clock from the HDX interface you need an S/PDIF or AES/EBU cable going *to* the Eleven Rack and the Eleven Rack set to clock from that. And that cable will be used when you want to Reamp. and of course you need the S/PDIF or AES/EBU cable going the other way for the Eleven Rack output. It may be easier on first test to just set up your system to clock from the Eleven Rack. And the Eleven Rack editor makes it easy to set what signal is sent to the S/PDIF or AES/EBU output.