Re: Plug-ins not showing in plug-in window
Is the version of DINR 7.1.1? I think that is the first version that works with Intel Macs. Pultec should also be at 7.1.1.
Plug-In Compatibility
Make sure that all Plug-Ins are compatible with Pro Tools 7.
-Open MacHD>Library>Application Support>Digidesign>Plug-Ins
-Check the Version of each Plug-In
You can check the version by selecting the plug-in and go to the "File" menu and choose 'Get Info', or hit Command-I and look at the version information under the 'General' Section
-Digidesign Plug-Ins should be version 7.0 (Dynamics III version 6.9) or higher
-Check with third party plug-in manufacturer's to confirm that the plug-in version you have is compatible with Pro Tools 7, and here:
Pro Tools 7 Plug-In Compatibility
Linked from the Pro Tools Plug-Ins section of the website:
Pro Tools Plug-Ins
__________________
Park
The Transfer Lab at Video Park
Analog tape to Pro Tools transfers, 1/4"-2"
http://www.videopark.com
MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays,
Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax.
Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track.
|