Re: Protools 11 boots, but hangs on opening a session.
Dear Chris,
Can you be more specific about what I did wrong? I've included all the information wanted in my profile.
Second:
PT is installed on my internal drive, I'm working only from my internal drive, but than the problem occurred. The problem was resolved by booting once from an external drive and than reboot from the internal drive. I'm not booting PT from an external drive. I mentioned this in the beginning of my post, I thought this was clear, the second time I mentioned it. quote "But hear this: after booting from an external drive and than reboot from my internal HD solved the problem"
I'm recording to an external firewire drive. Since I'm working with PT for more than a decade. I'm not a newby.
Kind regards
Hugo
__________________
Kind regards Hugo
Protools 11
iMac late 2012 3.4 GHz i7 16GB Ram
3TB Fusion Drive
Mavericks 10.9.3
Metric Halo ULN2 Expanded - connected with thunderbolt to FW800 adapter to cable FW800/FW400
|