Re: Please help with 'Cannot initialize device...' when hitting play
Something else:
With my system set up for 48K session in Protools:
if I go into the Windows control panel for the Tascam 16x08 and go to properties/advanced and hit the test tone, windows says 'failed to play test tone'.
I do not even have Protools running. Protools is closed and I get this error from Windows when testing the TASCAM.
The control panel shows the TASCAM set to 48/24 which matches my Protools sessions.
If I change the windows control panel to 44.1/24 now the test tone plays.
So I opened the Tascam driver's settings panel, I can see that the TASCAM is set to 44.1k.
I can see that when I change the setting in Windows and hit apply, sometimes the TASCAM shows the change and sometimes not. It is inconsistent.
Whenever I have a match in the setting (48k or 44.1k ) between windows and the TASCAM, the test tone plays. When they are unmatched the test tone fails.
I can't figure the rhyme or reason why sometimes the apply button works but other times it does not.
__________________
DC-Choppah's Project Studio:
ASUS PRIME Z390-A / Intel i7 rackmount PC
Windows 10 home 64 bit
Pro-Tools 11.3.1
AIR Instrument Expansion Pack v2
WAVES Platinum plugin bundle
Tascam US-16x08 Interface
100% Analog real time monitoring 16x4
Yamaha 16 channel MG16XU Analog Monitor Mixer
Yamaha MX-88 / Novation XiO keyboards
Mackie 4-channel headphone amp
Adam A8X monitors
Blue / Shure, etc. microphones
Estonia 6' 8" Parlor Grand Piano
Yamaha Studio Drum kit
https://www.dc-choppah.com/
|