View Single Post
  #2  
Old 02-28-2012, 03:56 PM
Zuzudaddy Zuzudaddy is offline
Member
 
Join Date: Feb 2012
Location: Elizabethton
Posts: 22
Default Re: PT10 Refusing to play audio...

Let me say that overall your computer is a little under powered for PT 10. But that's not saying it wont work better than now. Here is where I would start.

From your report it shows miss matched ram. You should always use identical matched ram.

Also you have only one HDD showing so you probably have PT loaded on your system drive and are trying to record to that drive. This Is a no no. Also your system drive is 5400 rpm you need a 7200 rpm drive to be able to run PT efficiently.

You should use an external usb 2.0 or esata drive to record to, make sure it's also 7200 rpm. Disable your Ethernet card and your wireless adaptor when using protools. Go and read the Windows system optimization instructions from Avid. There are many other things you can do but I would start with this.

Hope this helps.......

Sean
Reply With Quote