[bryced87]

I mean very loud as in the level meter in pre fader setting is in the orange. The input knob is all the way up. What's always been strange is the with AT2020 I've never been able to even get an input level of green unless the input knob on the Mbox 2 is half way up. I'm using the side of the mic with the logo on it. If I use the AT2020 mic through a regular mixing board it's input level is clipping while halfway up through the board input. So the mic does in fact work.

To test this I used the same XLR cable I use for my Mbox 2 in a standard digital mixing board. SO it's not the cable either.