Thread: MIDIOT
View Single Post
  #5  
Old 10-23-2000, 05:42 AM
Neil Ward Neil Ward is offline
Member
 
Join Date: Mar 2000
Location: Bedford, UK
Posts: 300
Default Re: MIDIOT

Hi...

Have you got the 505's midi out port set to 'midi thru'? it is a shared port as you say, but you must set it to either out, or thru in the system setup.
You must set midi thru in the midi pull down menu in PTLE. Also, as Slovenec pointed out you will only be able to use the 16 midi channels of the 001's built in midi port. This means that you cannot share midi channels between your instruments, i.e. you cannot setup a patch or channel 1 on the 505 and also on the S-950... you will hear both instruments when you only want to hear the one... (hope all that made sense)

To echo what the other guys said... go buy a book on midi, lotsa good ones at Amazon etc., and read it from cover to cover and again!
//NW
Reply With Quote