View Single Post
  #2  
Old 03-31-2021, 03:14 PM
albee1952's Avatar
albee1952 albee1952 is offline
Member
 
Join Date: May 2004
Location: Norwich, CT
Posts: 39,306
Default Re: Cannot change sampling rate in ProTools First

My best advice for anyone using Pro Tools First is; don't use Pro Tools First(it just isn't good due to its many limitations and shortcomings) Now, I'm not sure if it is the cause of this issue, but a good way to check is to remove it and get the free 30 day trial of the full Pro Tools software.

Having said that, according to the main Avid website, PTF SHOULD be able to run 96K, so that leaves 2 other possibilities:
#1-the interface doesn't support 96K, or is defective
#2-some other program(or the OS) is using the interface and locking PT out of controlling the sample rate(to fix this, try setting the computer to use Core Audio or the on-board audio, to free up the interface for total control from PT)
__________________
HP Z4 workstation, Mbox Studio
https://www.facebook.com/search/top/...0sound%20works


The better I drink, the more I mix

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote