Re: NAGRA IV-BL output cable
standard banana ends work just fine (from Radio Shack will work)
looking at the right side of the Nagra:
the 2 jacks to the front edge of the unit are the signal out, the 2 jacks to the rear edge are ground points
I am going to assume XLR:
the 2 forward jacks connect to pins 2 and 3
one of the rear jacks connects to pin 1
Yes, you have 2 mic pres but they sum to mono for recording
you also have a line input on banana
__________________
...
"Fly High Freeee click psst tic tic tic click Bird Yeah!" - dave911
Thank you,
Craig
|