View Single Post
  #2  
Old 05-01-2012, 09:23 AM
lampmusic lampmusic is offline
Member
 
Join Date: Jan 2004
Location: Coastal GA
Posts: 377
Default Re: Control Surface For Protools 10 Mackie Pro Control or Avid Artist Control

I was fortunate to happen up on a slightly used Euphonix mix controller a few months ago at the local Samash store.

I was able to talk the guy down to $599 - a little less than half off :)

BUT . . . i've really had a time with the unit being recognized when I first boot up. I have determined that if my air wi-fi is on it will generate a conflict / error message every time. Then I have to open the euphonic software and select the controller manually from the available list - - every time.

The only time that the controller is automatically recognized on boot up is if the wi-fi router is down.

Can't seem to find any solution for that issue either.

Other than that it seems to work pretty well with PT-10HD.
__________________
Running Pro Tools 2021.12
Main System 2020 M1 Macbook pro 13 inch / 16MB Ram / 1TB SSD / Big Sur


Future System 2021 14inch M1 Pro / 16MB Ram / 512 / Monterrey
Reply With Quote