[musicman691]

You have a lot to learn.


First off - where are you plugging the headphones into - the keyboard or your computer? To record the audio from your keyboard you need to connect the audio outputs from the keyboard to an audio interface connected to your computer.


Then on the instrument track you need to select the audio input that your keyboard is connected to. Record arm the track and you should hear the audio coming from your keyboard. Of course make sure you have he input levels set right on the interface so you have ample signal but not overloading the input.


I suggest getting a good beginner's book on recording. There should be a couple of good books along that route that deal specifically with working in PT. Of course reading the PT manual is always a good thing.