View Single Post
  #2  
Old 07-12-2013, 12:14 AM
miezurecords miezurecords is offline
Member
 
Join Date: Aug 2011
Location: Cluj-Napoca, Romania
Posts: 8
Default Re: Avid Fast Track C400 SPDIF loop not working

Ok, so I managed to make the loop by setting the clock source SPDIF in the interface's menu.
Works when testing with the C400's Control Panel app, in spite of some minor clicks and pops.

Issues:
The TC processor only supports 48k sampling rate when it's being used as a master clock.
When I start ProTools, the whole machine almost freezes and the audio interface freezes as well. I have to turn off the TC, unplug and replug the interface and, only after that, I can use it again...

The only viable solution I have is:
Record through the interface and at mix-time plug the processor's analogue RETURNS into the C400's analogue inputs while still using the interface's SPDIF out for SEND.

So, i guess it's a sync issue. Any suggetions? :)

Sent from my GT-I9100 using Tapatalk 2
__________________
MacBook Pro 13 (mid-2009)
Core 2 Duo 2.26GHz, 8GB DDR3 Corsair
Kingston V300 240GB SSD running 10.8.2
----------------------------------------------
Hackintosh (2011 SandyBridge TonyMac build)
Core i7, 3.4GHz quad, 16GB DDR3, Kingston V200 128GB SSD running 10.8.2, Seagate 1TB/7200rpm/64MB cache, AMD Radeon 6870 HD
----------------------------------------------
Apogee Duet, Yamaha HS80m, Audio Technica ATH-M50
----------------------------------------------
ProTools 9, Logic Pro 9
Reply With Quote