Quote:
Originally Posted by therecordinghouse
standalone mode does not work like that. the optical ports are not available.
|
From page 98 0f the Getting started with 002 and 002 rack guide.
S/PDIF Outputs
In Stand-alone mode, the S/PDIF outputs on the
back panel of Digi 002 mirror outputs 1–2 at all
times. If RCA is chosen in the S/PDIF preferences,
only the RCA S/PDIF connector is active.
If Optical is chosen in the S/PDIF preferences,
both
the RCA and Optical S/PDIF connectors are
active.
If Optical is chosen in the S/PDIF preferences,
only Main Outputs 1–2 are mirrored in the Optical
Output port.
ADAT Optical Outputs
In Stand-alone mode, if RCA is chosen in the
S/PDIF preferences, all 8 Input channels are
passed directly to the ADAT Optical Output
port, pre-fader and pre-effects. This allows you
to route input signals directly to an ADAT device
and record raw input data on all 8 channels.
To change the digital output format:
1
In Stand-alone mode, press F1 (Utility).
2
Press the illuminated Channel Select switch
under Pref.
3
Press the illuminated Channel Select switch
under SPDF (S/PDIF).
4
Press the illuminated Channel Select switch
repeatedly to toggle the digital format to RCA or
Optical.
5
Press the Escape (Esc) switch to exit SPDF preferences.
6
Press the far right-hand Channel Select switch
to save the preference settings.
7
Press the Escape (Esc) switch twice to exit Utility
mode
I have not tried this personally and may be misunderstanding the user manual but it sounds to me like it should work.