Re: Sample Cell Software Install
Odds are that you have a memory resource conflict. On the Sample Cell card there is a rotary switch. This switch is mainly used if you have more then one SC II card in the system. The Switch goes from ID 0 to 6. Each ID sets the sample Cell card to a specific set of Memory ranges. I don't remember what the ranges are for each ID, but they are listed in manual.
The GDI.exe could also be a sign of a conflict with the video driver on your system, or it is conflicting with the memory ranges of the video card. You could try going to a standard vga video driver and then try to install the software again. Your best bet is trying a different ID.
-bm-
|