Re: MTRX Studio with Dante on the secondary Ethernet port on an unmanaged switch?
Both MTRX Studios are set to External Clock (i.e. not to clock from Dante), which is totally fine, but have you connected Loop Sync or WC connections between them? Do you have MTRXStudio set to "internal" in DADman and MTRXStudio2 set to "word clock"? (I'm not exactly sure how DADman handles Loop Sync - the manual is not clear - so I would probably just use the WC connection unless someone from Avid can explain otherwise.)
PS. If you have AES67 enabled on MTRXStudio2, I would disable it. (Mentioning because PTPv2 should be N/A for an all-Dante environment.)
|