View Single Post
  #3  
Old 02-26-2021, 10:13 AM
crizdee's Avatar
crizdee crizdee is offline
Moderator
 
Join Date: Dec 2004
Location: Brighton, UK
Posts: 10,666
Default Re: Can't see my second HD 192? Help

Quote:
Originally Posted by postman56 View Post
I'm running Pro Tools 8 on a Mac Pro 4.1 with OS 10.6..with a D command

and the extra fader pack.
I'm seeing the first 192 analog, but the second 192 digital isn't showing up in my Hardware on the session.
The first 192 is connected to the core pcie card, the software is seeing both sections of the D-Command.


It's been awhile since I set this system up, and had I recently had to buy a new power supply for the board, so not sure if I need to reinstall the second hardware into my Protools sessions. Any suggestions how I go about that???? Please??

Thank you.
Hi,

You don’t say how the second 192 is connected?

Is in connected direct to a card or linked from the first 192?

Also how is the second 192 clocked to the system? It should be connected to and from the first 192 via loop sync to get its sync clock

Chris
__________________
PT MAC Troubleshooting... http://duc.avid.com/showthread.php?t=54888

Producer, Engineer,
UKmastering Mixing & Mastering
Blinders_Columbia top 40 UK album charts
Slow Readers Club Joy Of The Return #9 UK album charts

www.ukmastering.com


PT10.3.10 Mountain Lion HD6 accel Magma PE6R4 D Command 32 MacPro 12 Core 3.46ghz UAD-2 Octo x2. Manley Vari-Mu, Manley Massive Passive, SSL VHD, ADL600, Grove Tubes ViPre, Tube-Tech CL-1B. Hafler TRM active monitoring.
Reply With Quote