Re: 003r clicking sound and unwanted signal on input 1
Hello
Thanks for all the suggestions. Nice to read everybody is trying to figure out this problem with me.
To avoid confusion; the click I hear in the audio output. It’s not a relay that’s poppin’ like when it boots up. Speaking of which, it boots up normally after two clicks (2 or 3 clicks), together with the front lights. You know, normal boot sequence.
I tried 3 different firewire cables and all available FW400 ports. First thing I tried before posting the initial post. All give the same problem.
I also opened up the 003 and reseated all connection I think are related to input 1 (it is printed on the PCB’s).
Also looked for bulging or cracked caps, but everything seems clean. Inside it’s a very clean house. No spider webs or dust or anything.
I looked for “relays” (after googling pictures) and cannot find any.
Next to the single click, there is also a very low frequency signal coming through in the mixer on input 1. Constant signal at -6db (I posted pics earlier).
Hopefully I can pin-point the issue and fix it.
|