View Single Post
  #2  
Old 08-11-2008, 09:23 AM
Rick Sanchez Rick Sanchez is offline
Member
 
Join Date: Oct 1999
Location: North Hollywood, CA.
Posts: 405
Default Mojo Storage

Jamie, I use Mojo with an internal SATA drive for the video with no problems however I don't put video and audio on the same drive. ProTools likes to see video and audio on separate drives, so I would either put 2 SATA drives in your system or use the Internal SATA for Video and external firewire (using a PCI firewire card) for your audio. The internal Firewire bus is used for the MOJO.

Also, depending on what resolution video you are planning on capturing, you may need a raid. DV or lower is fine on one drive. Uncompressed will need a striped set of drives. I believe Avid recommends a minimum 4 drive stripe for Uncompressed SD.
__________________
Rick Sanchez
http://www.posthastemedia.com

MacPro 2x2.66 GHz Dual Core "WoodCrest"
Mac OSX 10.5.8 / 4 Gig Ram
ProTools 8.0.4
Digidesign/Magma PE6NE-I upgraded 6 slot expansion chassis. (Host card in Slot 2 of MacPro)
HD3 Accel
BlackMagic Decklink Studio 2 (In Slot 3 of MacPro)

SurCode / Dolby Media Meter 2
Izotope RX2 Advanced / Sonic NoNoise
Waves Platinum 7.x / Serato PitchnTime
Melodyne Studio / Altiverb XL / Speakerphone
KOMPLETE 7
EQuality / Massey L2007
TC MasterX
Reply With Quote