Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) (http://duc.avid.com/forumdisplay.php?f=17)
-   -   Using PodXT with original MBox (http://duc.avid.com/showthread.php?t=155265)

kkoran 12-19-2005 10:42 AM

Using PodXT with original MBox
 
I just got a PodXt for laying down guitar tracks in my home studio. Currently, my setup is an MBox running to Pro Tools 7 LE. I would like to know the proper technique for connecting the PodXT to the Mbox to get the best possible sound quality with the least amount of noise/hum/pops and other signal quality issues. These are the aspects I need assistance with, as I am fairly new to home recording:

-Do I need to use a DI Box anywhere in the signal chain?

-What kind of cables should I be using? balanced/unbalanced? (PodXT accept them both for outputs)

-Should I be plugging the outputs of the PodXT directly into the Mic/Line Inputs, or use the TRS jacks because the PodXT is considered "outboard gear"

-Which setting should I use for inputs on the front when coming out of the PodXT into the MBox, Line or Instrument, and does it depend on the cable I am using?

-Lastly, should I save all other effets and EQ processing (ie: verb, eq, compression) for mix down and just use the PodXT for my amp distrotion/mic/cabinet model settings??

Thank you very much, any help is greatly appriciated!!


All times are GMT -7. The time now is 04:26 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com