Is it possible to bank 2 Artist Mixes separately
 

I have two artist mixes and would like for them to bank separately. I know I can use the Assign and Layouts section of the Eucon software to lock some of the faders and create soft keys on my iPad to go between the Layouts but I'd rather they both be able to bank around by themselves.

Thanks!

Joe

Re: Is it possible to bank 2 Artist Mixes separately
 

I had two of these before I switched to S1 and they always were synced. Not sure if that can be done. My dual S1 behave the same. Maybe Eddie would know?

Re: Is it possible to bank 2 Artist Mixes separately
 

I don't have 16 faders to test this on but do you have "Bank by Whole Surface" checked in the General tab in EuControl Settings? Seems like disabling this might give you the results you're looking for.

-Chris

Re: Is it possible to bank 2 Artist Mixes separately
 

"Bank by whole surface" just means they bank by the full fader count. Otherwise they bank by 8. It doesn't separate them.

So if you have it turned on and have 16 faders (2 artist mix or 2 S1), when you bank, it will shift by 16 faders.

Turned off, and it will shift by 8 faders.

Re: Is it possible to bank 2 Artist Mixes separately
 

No, can't do it.

You can assign layouts to softkeys, turn to the layout page of the softkeys, or use the top left drop down (Filters & Layouts) to flip through layouts. But Eucon always acts as one unit.

Re: Is it possible to bank 2 Artist Mixes separately
 

Ah. That makes sense. Thanks for clarifying.