more sync problems
My recent post was about sync'n the MPC2000xl to pro tools 7.4 via M-Box 2
I was successful after reading digidesign's exact directions another user referred me to. All of a sudden today I ran into a few problems. After I sync both the pro tools and mpc, I hit play/start on my mpc to begin recording but it doesnt trigger the pro tools to record. I have the MIDI OUT from my mpc to the MIDI IN to the M box. I have the 1/4 inch plugs from my mixer to the M-Box 2. I have the MPC set to sync'd like the instructions from digidesign, make sure pro tools is set to ANY for the MTC port, I hit the online button in the transport, record on the track, record on the transport, then play/start on my mpc to begin but it only plays audio from the mpc, without recording. I can hear the drum pattern playing in my mpc, but nothing is showing up on pro tools. In the corner it still says "waiting for sync" I'm stuck... Here's how i got it hooked up while i'm trying to sync after composing my tracks MPC2000xl *= Plugged In To midi out (a) = M-Box-2's midi in midi out (b) = Roland Fantom XR Sound Module's midi in stereo out = Mixer - line-in 5/6 via 1/4 inch record in = stanton t-60 turntable via 1/4 inch ROLAND XR Module Roland Module = mixer - line-in 3/4 midi in (See mpc midi out) M-Box Monitors L & R MIDI IN = MPC's MIDI OUT Mixer MAIN OUT = to reciever with speakers |
All times are GMT -7. The time now is 01:39 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com