BabyFace Pro to ISA One?
 

Hello everyone, I have a little situation that I would love some help with.
So right now my set up is:

TLM 103 Into Focusrite ISA One Mic 1 Input Into Balanced TRS Input on the Focusrite Scarlett 2i2 (3rd Gen) Into my protools on Windows 10 and everything is running good. I turn down the gain on all the way on the Scarlett and leave the 48 Phantom power off and power it on using the ISA One

I just purchased a BabyFace Pro interface to upgrade from the Focusrite Scarlett. But now I’m doing research on how to set it up (which I should have done first) and I can’t find a definitive answer. I was guessing I could just run it the same way I did the Scarlett.

So my new set up should be:

TLM 103 Into ISA One Mic 1 Input Into BabyFace Pro Into My protools on Windows 10

I would greatly appreciate some help on setting this up.

Re: BabyFace Pro to ISA One?
 

With this equipment, the ISA-ONE should connect to input 3 or 4 as those are line level(connecting to either of the mic inputs will be bad as you would be running a preamp into another preamp).

Re: BabyFace Pro to ISA One?
 

No. Line 1 and 2 are functionally line-ins when not used as mic pres.
Nothing "bad". Just don't have gain up.

3/4 inputs are unbalanced (unlike balanced 1/2)