How to get this system working - please :-)
Folks
While clearing out some old machines I came across the following - but no ProTools Software 882 I/O Interface NuBus Card - TDM Piggyback, Single Interface Master with computer and SCSI cables NuBus Card - Dual TDM Piggyback with interconnect cable to the above Both the above cards are dated 1993 The cards are currently mounted in a PowerMacintosh 8110/110. This is a NuBus machine machine with a Power PC 601 processor. The machine can run Mac OS 7.5 up to OS 9 So... Can this Pro Tools hardware be run on this PowerMac - I also have a Mac IIfx available What Pro Tools Software do I need? Where can I get this software? I hope someone can advise as I would hate to see this equipment sitting there if it can be pressed into modest use. Brian |
Re: How to get this system working - please :-)
You have a Nubus Pro Tools III core system, It will work fine in the 8100/110 you have, Pro Tools 4.2 is the last official software for that system. It wont have much processing horsepower, But it will be able to get basic jobs done.
|
Re: How to get this system working - please :-)
Milesofwire
Many thankss for the feedback - much appreciates :-) Do you or anyone know where I can get/download Pro Tools 4.2? Many thanks in advance Brian |
All times are GMT -7. The time now is 05:34 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com