AUX TRACK gets no signal
Dear all,
I hope someone could help me on following issue: Would like to add REVERB to an audio track (L-voc) via a stereo AUX track SETUP: Send (A) on VOC track is sending to BUS 1-2 AUX track in/out receives from BUS 1-2 DVERB is in the insert for the AUX TRACK L-voc armed The AUX track gets (fader is up) no signal sent from L-voc at all ... ? I checked the In/out settings and all is correct I run the 002 via PT8LE Could someone give me a hint where the problem comes from ... many thanks Serge |
Re: AUX TRACK gets no signal
Bump ...
Is there anyone who could jump in here, please? thanks Serge |
Re: AUX TRACK gets no signal
So you are trying to hear the Reverb on the incoming signal while recording?
Not really the most desirable thing to do because of latency but; -Do you have the Send fader turned up? -Is LLM turned on or off? Record something then see if it sends the audio that is recorded to the Reverb during playback. |
Re: AUX TRACK gets no signal
Make sure your Send's fader is also set to a decent amount.
|
Re: AUX TRACK gets no signal
Quote:
|
Re: AUX TRACK gets no signal
Quote:
As Albee said, if you don't want the fader to be automatically down each time you create a send, adjust in preferences menu. |
Re: AUX TRACK gets no signal
Dear all,
thanks for yr input Of course the fader was up ... that was the first thing I did when I created this setup via the AUX track However the solution to make it work is: to "UNTICK" LLM So a big thank you to "SKI" kind rgds to all Serge |
Re: AUX TRACK gets no signal
Ah yes...LLM. The manual is pretty clear about LLM mode disabling sends and plugins on any track that is in record ready(you can tell as the little "buttons" that represent sends and plugins go blue). BTW, when they are inactive, they go grey. Let the learning begin:D:D (IOW, don't get discouraged by all this. There's a lot to learn and you'll get there in time);) If you hate reading manuals, try searching youtube for "pro tools and ________(insert issue here)" without the quotes as there are lots of tutorials(some better than others). Another great source of videos is pro-tool-expert.com(toss them a donation as it will be well worth it).
|
Re: AUX TRACK gets no signal
The good thing is once we got the 32 buffer setting the use of LLM wasn't as critical as it was prior to that.
Remembering the days of saying get a mixer to monitor your playing seems like a very long time ago.:D |
Re: AUX TRACK gets no signal
I also record at the 64 buffer setting(LLM has not worked on my rig for 2 years:eek:). No complaints about latency there either.
|
All times are GMT -7. The time now is 07:05 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com