PatchNet not saving monitor patches
 

Hi :-) At my work we have System5 fusion. SC264D system computer with two dsp cards and without the analog monitor-comm interface module, madi monitoring and external converters are used.

This problem persists since the beginning and through several eMix upgrades and reinstalls. eMix version is 6.1.0 b19.5 (93592).
So the problem is, in every title, newly created from scratch or old template used, the eMix isn't saving the monitoring patches. No matter what patches are made and saved, after relaunching the title the CR main monitors are defaulted to card 1B, channel 1 to 8 (which is not convenient since the studio is wired differently and one have to manually repatch this section on every console boot). The monitor A section is getting erased, the monitor B C and D are functioning fine.

Any ideas or help will be appreciated :-)

Re: PatchNet not saving monitor patches
 

There is a Registry input that you need to change, otherwise the CR will always default to that output.
It is HKEY_CURRENT_USER/Software/Euphonix/eMix/Persistent/Monitors/VariableMADIOutputs

Change the ControlRoomMADIPort entry to 28 (anything above the actual number of ports you have will work), save, and reboot.

Note: do a backup of your registry before tweaking, I am not liable for any errors you could make.

Re: PatchNet not saving monitor patches
 

Works perfectly !
Thanks a lot !
:-) :-)