Unable to monitor spdif input on digi 001
howdy everyone. Here's my dilemma-
I buss 8 channels of A-dat optical into a yamaha 03d. The rest of the channels are bussed to stereo outs of the digi, which is analog 1/2 and spdif out. I can monitor everything fine on the yamaha board, and I send a stereo mix of everything from the 03d mixer back to the digi via spdif out of the yamaha. When I bounce to disk, the spdif signal sent from my mixer doesn't end up on the mix. I also cannot hear the returns (spdif) from the yamaha if I monitor from the digi 001 with my spdif cable going into the input on the digi. I think I'm missing a small but vital step. Any suggestions? |
Re: Unable to monitor spdif input on digi 001
Thanks Brent. I'll give that a try.
|
Re: Unable to monitor spdif input on digi 001
mix2much - do you have optical spdif output
source on your 02r that you can send spdfif signal to optical input on digi pci card? Have you gotten this to work? How? |
Re: Unable to monitor spdif input on digi 001
Yes, the optical works fine both in and out of the pci card. It was actually very easy. In the mix window, I chose the track I wanted to send to the board optically, and onthe output of that channel I had to change it from analog 1/2 to A-dat mono 1 (or whatever channel number you want it to be) I made sure my board was slaving to the spdif in clock of the digi 001.
|
All times are GMT -7. The time now is 05:51 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com