Re: EUCON 3.0 and system 5-MC
 

Serge sorry

I didn't see your post ! Same here, no pan

Roll

Re: EUCON 3.0 and system 5-MC
 

Hey, I don't know that I can be of much help with any of the other problems. But if you duplicate your 10 UserSet and just change the 10 to an 11 it will actually work with 11 up.

Re: EUCON 3.0 and system 5-MC
 

It's good to know, thanks "Roll"

Thank for the tip but are you taking about the MC Pro or the artist? There is no "10" to be replace anywhere . For example, one of my userset is call "June 26 th".

Anybody successful with a system 5 MC, PT10 or 11 and Eucon 3.0?

Re: EUCON 3.0 and system 5-MC
 

I Just reinstall everything, no luck ...

and Xmon in Eucon do not work properly anymore (i fact it nerver really did)

Re: EUCON 3.0 and system 5-MC
 

Any news for an update ?

Re: EUCON 3.0 and system 5-MC
 

I have to admit not being able to use the system 5 MC with coexisting PT 10 and PT 11 (eucon 3.0) is a major pita. An update would be mostly welcome. :rolleyes:

Re: EUCON 3.0 and system 5-MC
 

Someone did not quite think that one through..
It would make sense if they also allowed for simultaneous 2.7 and 3.0

Re: EUCON 3.0 and system 5-MC
 

H.G. Hollans

How can we contact you, maybe can we help for an update,

I'm in between two job actually, and have time for some test

Roland

Re: EUCON 3.0 and system 5-MC
 

You should be able to email me directly by clicking on my name. Let me know if that doesn't work.

At this point, I don't think we need you to try anything else, but I may need some information from you about your setup so that we can try and reproduce some of the problems. Let me talk to our software team, and get a list of the specific info that they need.

Re: EUCON 3.0 and system 5-MC
 

Thanks to the discussion above, I was able to get EuCon 3.0 running with PT 10, 408 modules updated and all automation is working in both directions for ProTools.

However, I use Nuendo on a second workstation as my control room monitor and now the S5-MC is not mapping the control room functions. in fact only 4 button are accessible in the soft keys bank 1, and nothing else.
Functions are mapped to other buttons but are not accessible (not lit up). No functions are mapped to the "soft knob" or the "Monitor/Control Room/Talk Back/Assignable Knob" sections.

Yes, I did drag Nuendo 4.3 into the Eucon Application's List, restarted the whole system (several times), same result.

What am I missing?

System info:
System 5-MC
Eucon 3.0 ( on MC and Work Stations)
Nuendo 4.3
Mac OS 10.6.8