Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
Hi there,
Could anyone please talk me through how to set up my EL Distressor as a hardware insert with an Avid Omni and PT 11 HDX? I've tried doing it but keep getting a horrible delay in the audio no matter what H/W delay compensation settings I use. Would REALLY appreciate any help as I'm fairly new to this. Thanks ever so much! Alastair |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
do you have it as a send and return or as a hardware insert?
you want it as an insert so input and output must be the same (out 3 / in 3) |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
I'm trying to use it to mix with rather than record so I'm using it as a send and return. Is that the right thing to be doing? Thanks for the super fast response!
|
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
No, there is no delay compensation on send and return
ADC is only on Hardware Insets a hardware insert can be used on an Audio track, Aux track, or Master fader you need to set it up in the Insert tab of the I/O Menu |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
Ok - so I've now re-wired my Distressors to go in to inserts 3 & 4 on my omni and the outputs to go out of 3 & 4, and I've re-named them in the insert tab of the I/O setup.
When I go to insert I/O as a plugin it shows me the Distressor names but says DigiLink n/a afterwards and they're inactive. How do I activate those now? Many thanks! Alastair |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
Do you have 3&4 assigned in Inputs and Outputs as well?
|
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
Sorted it!!! Thank you SO much! Last question - can I expect to have to manually add any hardware insert delay time for the Distressors or will they be covered by ADC?
Thank you so much again! Alastair |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
They should be covered by ADC automatically when you have it turned on
A digital processor might need to be compensated for a hardware reverb I'd work the offset into the pre-delay |
Re: Using a Distressor as a hardware insert with Avid Omni & ProTools 11 HDX
Thanks again!
|
All times are GMT -7. The time now is 12:06 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com