Added 2nd HDX card; RX580 video card fan rubbing against it! Yikes!
 

Hi, folks, just wondering if anyone else has experienced this and found a workaround. MacPro 5,1 tower, just added a second HDX card into PCIe slot 2, and slot 3 has another HDX card. (PCIe slot 4 has SSD drives in an OWC Accelsior SSD bay.) Now the fans in the RX580 rub against the HDX card.

Presently I’ve put plastic spacers in between the top of RX580 GPU and bottom of the HDX card, but it’s a tight jam and I don’t want to damage anything. Any suggestions?

Is there a way to house a PCI card or video card outside of the computer’s case? Thanks for any advice, cheers to all.

Re: Added 2nd HDX card; RX580 video card fan rubbing against it! Yikes!
 

Only good solution is to use a magma pcie chassis for the hdx cards. Which is what i did for my 5.1. But I have used a little adhesive rubber spacer as well between the gpu and the card next to it. In the past it was a red rocket x card. As long as you don't move your rig it works.

Sent from my SM-G986U using Tapatalk

Re: Added 2nd HDX card; RX580 video card fan rubbing against it! Yikes!
 

Hello,
All ours are that way, we put small adhesive feet on the 580 cards to space them from other cards. Works great on our remaining 5,1s.
Hugh

Re: Added 2nd HDX card; RX580 video card fan rubbing against it! Yikes!
 

Coffee stirrers!https://uploads.tapatalk-cdn.com/202...5e93ecc042.jpg


James Welch
Recording Engineer | Producer
Masterlink Productions

Mac Pro 5,1 (Mid 2010) | 3.46GHz Six-Core Intel Xeon | 32GB Ram | AMD Radeon R9 280X 3072 MB | 256GB Samsung SM951 SSD Blade (PCIe) System Drive | 1TB WDC Sample Drive | 4TB RAID 0 Seagate Audio Drive | UAD-2 Quad PCIe
Mojave 10.14.5 | Pro Tools Ultimate 2019.5 | HDX | Avid Omni | Avid 16x16 HD I/O x2 | Digidesign 192 | Digidesign C24