Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools TDM Systems (Mac) (https://duc.avid.com/forumdisplay.php?f=11)
-   -   Multiple PRE's and 192's (https://duc.avid.com/showthread.php?t=325447)

midafari 07-13-2012 12:53 PM

Multiple PRE's and 192's
so this is how i am routed

PRE's 1 and 2 output (analog db25) to 192 A (master) 2x db25 inputs
Pre 3 output (analog db25) to 192 B (slave) db25 input

192 A output to Masters input on Xmon unit (analog db25)
192 B output to Cue inputs on xmon unit (analog db25)

I can monitor the master outputs of the xmon unit just fine.
I cannot monitor the Cue form the xmon unit at all.

-The cue input on the xmon is tested and functional
-the cable from the 192 B to the cue inputs of the xmon is tested and functional.
-The cue output from xmon to headphone amps is tested and functional

I think I have narrowed it down to "no signal from the outputs of 192 B"
BUT, I do see meters jumping on the correct outputs of 192 B

Based on ANY info i have offered, does anyone have ANY idea on why I get nothing out of the 192 B outputs? Very frustrating

Thanks all for any input

All times are GMT -7. The time now is 12:35 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com