PT 2019.6 at 96Khz mutes random regions
1 Attachment(s)
When running a 96Khz PT session i get the following....
Random regions do not play audio ( although i can see that the master fader level meters are playing the region, no audio is heard. Several track meters don't show any level, only a peak level is intermittently displayed. When the track meters on the playback channel display properly... random regions don't playback. Short Pre roll... region A plays, regions B + C show level in the master fader but are not heard Longer Pre roll... region A shows level in the master fader but is not heard, but regions B + C play. Converting the session to 48Kz, problem solved PT 2019.6 OSX 10.14.6 HDX1, MTRX, HDIO, Lynx 8, SYNC HD Mac Pro 5.1, 12 Core, 52B RAM |
Re: PT 2019.6 at 96Khz mutes random regions
I run sessions at 96 constantly and some at 192. No problem whatsoever. Everything smooth.
|
Re: PT 2019.6 at 96Khz mutes random regions
Well, here's a response from Avid Customer Care below...
I'm sure recording with the suggested buffer settings won't aggravate any actors :mad: ---------------------------------------------------------------------------------- Hello Stephen, Thank you for your response. Please use HW Buffer setting 512 or higher. Regards, Nestor Avid Global Customer Care | Audio Post & Pro |
All times are GMT -7. The time now is 05:07 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com