Fader Module meter led display with 5.1 tracks
Hey all,
I have a 5.1 Master layout with Dial, BG, FX, Foley, Music and something annoying is happening with those 5.1 tracks (Dial, Foley,...) having main activity on the center... Nothing is displayed on the leds next to the faders. Until you pan... Is there a way to display the sum of the track level when using 5.1 routing so I can manage the "global level" ? Thanks :) |
Re: Fader Module meter led display with 5.1 tracks
Currently its left and right. We could try and add an option to sum anything above Stereo. The meter next to the waveform is a sum I think.
|
Re: Fader Module meter led display with 5.1 tracks
This would be very nice. As it is now, I can no longer trust the led meters on the fader module without asking myself what type of track it is...
I assume M40 users can have a look at the display modules and that's it... |
Re: Fader Module meter led display with 5.1 tracks
Quote:
|
Re: Fader Module meter led display with 5.1 tracks
Wondering if this ever got resolved? Currently having a similar issue with 7.1.2 tracks where the metering is absent.
|
Re: Fader Module meter led display with 5.1 tracks
Quote:
|
Re: Fader Module meter led display with 5.1 tracks
Quote:
|
Re: Fader Module meter led display with 5.1 tracks
Quote:
|
Re: Fader Module meter led display with 5.1 tracks
Oh! And oddly enough, on the FX side of the desk here, we do have working LEDs next to the faders of 7.1.2 Beds. It's only the DX/GRP 7.1.2 Beds side right now that we're not getting LEDs next to the faders.
I've also tested banking around to see if the LEDs were dead but they work fine on other channels. :rolleyes: |
Re: Fader Module meter led display with 5.1 tracks
Quote:
|
All times are GMT -7. The time now is 12:51 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com