wave out\'s api windows standard
 

http://www.digidesign.com/ubb/images/icons/confused.gif

in a future is possible that they could be controlled more of the two-channel wave drivers i/o with the standard api of windows ?

it is possible to assign the two-channel wave drivers i/o wave api standard windows to any o/i digital of the box?


[This message has been edited by francisco (edited June 06, 2000).]

Re: wave out\'s api windows standard
 

In the wave driver settings dialog, you have these options for using different ins and outs on the Digi-001 (when using software apps other than PT LE):

Ch 1-2 Format control

Here you may choose between different types of I/O. When set to Analog, you can record into analog ins 1 & 2 and play back through both analog outs 1 & 2 and the S/PDIF RCA outputs. When set to S/PDIF, you can record into the digital S/PDIF RCA inputs. When set to ADAT Optical, you can record into the first two channels of the ADAT optical input. When set to S/PDIF Optical, you can record into the S/PDIF optical input. [See Sync Mode in the I/O Setup Dialog description below for info on syncing to the digital input stream.] In S/PDIF, ADAT Optical, and S/PDIF Optical, you can play and record monitor through both the respective digital outputs and the analog outputs.

Jim West
Digidesign