Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) (https://duc.avid.com/forumdisplay.php?f=17)
-   -   01v Fader Movements & PT (https://duc.avid.com/showthread.php?t=59010)

davec 04-08-2001 08:36 PM

01v Fader Movements & PT
Has anyone been able to fully automate their 01v and PT?


Zeus 04-09-2001 09:10 AM

Re: 01v Fader Movements & PT
Well, it really depends of what you mean...It is a piece of cake to control the Pro Tools' on-screen faders with 01v and set initial balances or record automation moves that way. But getting the screen fader movements back to the 01v is a completely different question...It is probably possible with some serious MIDI programming, but personally I would not bother.


Mocha 04-09-2001 01:38 PM

Re: 01v Fader Movements & PT
Since it's so easy, would you mind posting the instructions so others can benefit from it? I think that's what were looking for, not just to be told that it's easy. Thanks.

Zeus 04-10-2001 05:52 AM

Re: 01v Fader Movements & PT
Hmm. Just noticed this was the Window's forum. I know almost nothing about PC Pro Tools...But assuming it has the MIDI controllers in the peripherals menu in the Setups menu: Choose MM-16 as the controller. 01v as the input and output device. Set up the hexes on the 01v remote page 3 :


This is the basic setup to control the 15 first on-screen Pro Tools faders with the fifteen 01v faders. You must have the remote page 3 turned visible in the 01v.

All times are GMT -7. The time now is 08:00 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com