Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   ProControl, Control|24, Command|8 (https://duc.avid.com/forumdisplay.php?f=16)
-   -   'Fader Pack' and ProControl Fader order issue (https://duc.avid.com/showthread.php?t=132321)

Ciaran 03-20-2005 12:52 PM

\'Fader Pack\' and ProControl Fader order issue
 
Ok,

I was wondering does anyone know how to set up a Fader Pack to see the 8 channels ahead of the ProControl rather than after.

ie. ch1-8 on fader pack and ch. 9-16 on pro-control.

I have read the literature, but I guess I'm been searching under the wrong heading as I've had no luck on a solution so far....

opinions welcome!

Ciaran
www.ciaranhope.com

filmixer 03-20-2005 06:17 PM

Re: \'Fader Pack\' and ProControl Fader order issue
 
In the "Setups" menu select "Peripherals..." and click on "Ethernet Controllers". If "Enabled" is checked, you should see your Main Unit and Fader Pack listed. The Main Unit will be #1 and the Fader Pack will be #2. Select "none" for both, then reselect the Fader Pack in the #1 position and the Main Unit in the #2 position. That should do it.

Ciaran 03-21-2005 11:58 PM

Re: \'Fader Pack\' and ProControl Fader order issue
 
Thanks for the pointer. I had tried it before and it had not worked. However, this time I deactivated the whole damn thing, and when I loaded them up in a different order it worked. Thanks again.

yours in music

Ciaran
www.ciaranhope.com


All times are GMT -7. The time now is 04:13 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com