Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   General Discussion (https://duc.avid.com/forumdisplay.php?f=3)
-   -   Let's hear your latest stuff....right here (https://duc.avid.com/showthread.php?t=60365)

Chris Cavell 10-23-2004 10:37 AM

Re: Let\'s hear your latest stuff....right here
 
Unfortunately, the model number eludes recollection at the moment. What I can tell you is that they were B&K's, not DPA's and were phantom powered...so they had to be toward the end of B&K Pro Audio's production. They were free-field omni's, in a matched set with a beautiful case and two extra "screens" per mic for changing the frequency response characteristics. They were half incher's too...not the super tiny's or the larges. That info probably would narrow it down to a single model number...but I just can't recall that number for the life of me right now.

Gene Backlin 10-23-2004 03:25 PM

Re: Let\'s hear your latest stuff....right here
 
Quote:

gene; your "agnus dei" is by far the best thing I've heard you do, you really got a fantastic sound for that one...this sounded like it could be on the radio.

Thank you Jason, it was my favorite of the whole concert. It litterally sent chills up my back, especially the beginning before the piano comes in. I really enjoy these kids, they are just so sincere.

Take Care,
Gene

Aussie169 10-23-2004 05:45 PM

Re: Let\'s hear your latest stuff....right here
 
Quote:

Unfortunately, the model number eludes recollection at the moment. What I can tell you is that they were B&K's, not DPA's and were phantom powered...so they had to be toward the end of B&K Pro Audio's production. They were free-field omni's, in a matched set with a beautiful case and two extra "screens" per mic for changing the frequency response characteristics. They were half incher's too...not the super tiny's or the larges. That info probably would narrow it down to a single model number...but I just can't recall that number for the life of me right now.

I have ready access to a pair of B&K 4007's which are the tiny diaphram omnis. Fantastic sound and almost zero self noise. I can open my Buzz Audio pre right up and all I can hear in the cans is ambiant sounds. Every other mic add some degree of hiss in the same test.
The only reason I don't use them more is that they'll really show up a bad room LOL

Roy Howell 10-23-2004 10:54 PM

Re:
 
WestPhillySoulzition-

Quote:

some new tracks
this isnt radio garbage. its jazz infused groove soul . I do the tracks in one night and then put them to bed. tell me what you think, reviews are key.
thanks for listening.

http://www.soundclick.com/bands/1/onedependent.htm


WestPhillySoulzition,
Some very nice grooves here...good variety...good job in this genre.
-Roy

bigbubbaj 10-24-2004 07:12 PM

Re:
 
I wrote and recorded this song in memory of my dog, Jollie who passed away last week.

Thanks to Dan Walker(http://www.danwalkermusic.net ) for recording vocals and harmonica.

It is a bit sentimental, but you might like it anyhow.
Run To Heaven

Info on the song and others available at 5198 Studios



-Justin

Roy Howell 10-25-2004 02:03 PM

Re:
 
bigbubbaj,
Good song...a very heartfelt dedication and well done...thanks for posting it.
-Roy

skyking 10-27-2004 04:48 PM

Re:
 
heres a full length version of a song i posted on another site a month er so ago..this site works better than the other one.......chas

http://user.cybrzn.com/skyking/

spkguitar 10-27-2004 07:51 PM

Re:
 
By My Side

Here's a new one I've been working on. It's not even hardly mixed, but the pieces are coming together.

spkguitar 10-27-2004 08:00 PM

Re:
 
Justin - Great dedication to jollie. Well done.


Skyking - I really like that tune.

bigbubbaj 10-28-2004 09:26 AM

Re:
 
Roy, Shawn...Thanks!

Shawn - By my side is a cool tune. Nice prechorus/chorus. Like that part a lot.

A bit on the depressing side. But very brave self-expression. Takes big balls to write a song like that. Job hunt got you down?

I think a lot of people can identify with your message.

-Justin


All times are GMT -7. The time now is 04:05 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com