Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   VENUE Live Sound Systems (https://duc.avid.com/forumdisplay.php?f=25)
-   -   Using .dsh file (https://duc.avid.com/showthread.php?t=420353)

harvey bushell 05-25-2022 10:59 PM

Using .dsh file
 
Hi.. I'm a mostly retired FOH sound tech somewhat unfamiliar with the intricacies of using the SC 48 software. I can mix on one with no issues and set one up during soundcheck from the console's surface interface, one channel at a time but find it time consuming. I've downloaded the VENUE software app, latest version I believe, and through mostly trial and error and reading the instruction manual have created a 57 kb .dsh file that I'm hoping to bring into a venue next week to save setup time during soundcheck.



I created a 22 channel mix, set up basic parameters like HPF, EQ, O/P, Dynamics, channel names but not any house/mon EQ, FX or aux sends which I would like to leave up to the existing setup on the console at the club I'm visiting... I've used these before and like them so I don't want to change them and need his aux/fx/mon sends as they exist.


I believe the .dsh file I set up has only the things I want but am not sure if that file will be useable when I get to the club. I only want to save the parameters I've created but leave all the other things in the house console as default. Hope that's clear. See the attached pic for the parameters I believe I've saved on the file. Will this do what I'm hoping it will? And I hope this question is clear.


All times are GMT -7. The time now is 02:27 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com