Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools | First Discussion (https://duc.avid.com/forumdisplay.php?f=138)
-   -   How to save a template in pro tools first (https://duc.avid.com/showthread.php?t=418005)

Robape 12-01-2021 04:44 AM

How to save a template in pro tools first
 
Hi,
I've been using Pro tools first for a couple of months now and i'm starting to get the basics a bit.
So with help from youtube ive set up a handy vocal template with busses en so. Now, it seems that i cannot save this template at all except as a project.

Does anybody recognise this?

albee1952 12-01-2021 06:27 AM

Re: How to save a template in pro tools first
 
See me reply to your other post and ask the moderators to delete this one(because its really a duplicate);)

junkgear 12-01-2021 09:39 AM

Re: How to save a template in pro tools first
 
Pro Tools First does not support saving templates, which is a feature of the standard version of Pro Tools.

You can save track presets, which although not as clean, will save you time since you can load them in a new project.

Robape 12-01-2021 01:52 PM

Re: How to save a template in pro tools first
 
I haven't found out yet how to save track presets either.
could you point me in the right direction in a few words?

Robape 12-01-2021 01:59 PM

Re: How to save a template in pro tools first
 
@Dave, I see what you mean, but i thought it might be smart to approach this problem in two different ways.
Now i know that saving templates is not possible at all in PTF this thread is indeed of no use anymore.
I'd like to investigate the (im)possibility of saving track presets. if that's a dead end aswell i might considder using a different DAW since all the other pro tools versions are out of my budget.

junkgear 12-01-2021 02:11 PM

Re: How to save a template in pro tools first
 
To create and save a new Track Preset:

1 Create and configure one or more tracks for any of your common workflow scenarios (such as “lead vocal input chain,” or “drums parallel compression bus,” and so on).

2 Do one of the following:
• Select the track or tracks and choose Track -> Save Track Preset.

• Right-click the track name and choose Save Track Preset.

3 Configure the Save Track Preset dialog as desired

4 Click OK

For more info, watch this video on Track Presets


All times are GMT -7. The time now is 08:41 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com