No sound coming from my monitors on a Digi 002
 

Hello! I just got the Digi002 Rack and I have hooked up my two Event Monitors to the Mon. Output L and R. I get a signal showing on the ProTools 6.4 track from my keyboard when I use Audio Track, Aux Input, and even Midi Track. However, no sound is coming out of my monitors. I have switched between Auto Input Monitor and Input Only Monitor and it doesn't matter. There's still no sound. All of my volume levels are up and the Rack is not on mute. My sample rate is currently at 44.1. I need help!

Thanks in advance!

Re: No sound coming from my monitors on a Digi 002
 

Have you tried headphones?

Re: No sound coming from my monitors on a Digi 002
 

Create a Master Fader for Output 1&2 and see if you have any metering. Make sure the MUTE button or ALT SRC TO MON on the 002 isn't enabled.

Rail

Re: No sound coming from my monitors on a Digi 002
 

Unfortunately, the headphones don't work, either.

Re: No sound coming from my monitors on a Digi 002
 

Tried both and there is no sound. There is nothing on mute. I hit record on the audio track as well and there is metering, but still no sound. Any other suggestions?

Re: No sound coming from my monitors on a Digi 002
 

bump

Re: No sound coming from my monitors on a Digi 002
 

OK. I can tell this is going to be a long road for me. I was using the output as S/PDIF 1-2, which was what I was used to doing on my Digi001. I switched it to Analog 1-2 and it worked. Thanks to all who replied!