Omni Mic Pre Weird Behaviour
Hi,
My omni is doing something very weird.. The channel 1 mic pre gain seems to be intermittent... as i turn the gain knob up, one db at a time, the actual gain amount jumps about drastically. for instance - at +21db its quiet, same at +22 & +23 then when it hits +24 the actual gain amount jumps up by about 20db, then it goes back down at +25db gain. it keeps doing this all the way up to maximum gain... hope that makes sense?? Ive reset the omni & re-installed the firmware (2.10). Its a revision A unit running Pro tools HD2 10.3.7 on a 2010 Mac Pro. It still functions like this without pro tools being loaded.. The mic pre on channel 2 functions properly. any ideas at all? im at a loss... Thanks in advance Sam |
Re: Omni Mic Pre Weird Behaviour
Hi Sam.
I have forwarded your issue to Avid. |
Omni Mic Pre Weird Behaviour
Since the preamp is a stepped attenuator style, it sounds like something is physically wrong. The relays aren't stepping properly or the logic circuitry controlling them is flawed. I would have a tech look at it.
Parroted by me & Tapasquawk |
Re: Omni Mic Pre Weird Behaviour
Thanks Chris & James.
Hopefully someone at avid will be able to advise here on the duc.. I'm not too keen on spending £60 for 1 call of phone support.. Cheers Sam |
All times are GMT -7. The time now is 06:38 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com