Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Artist Series (https://duc.avid.com/forumdisplay.php?f=62)
-   -   eucon 3.0 crashes (https://duc.avid.com/showthread.php?t=340383)

tandri79 06-22-2013 03:22 PM
eucon 3.0 crashes
 
Just downloaded eucon 3.0 and when the program tries to boot up it crashes.

I have tried to repair permissions, thrashed preferences and nothing works.

If I go back to 2.7.1 everything is ok

my system is osx 10.7.5 on a mac pro 5.1

Has anyone got 3.0 to work?

Do you guys have any suggestions what to try next?

here is a part of the crash log. I cant post the whole log cause its to long but this was something I think is causing the problem.

Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000

smfelton 06-22-2013 03:37 PM
Re: eucon 3.0 crashes
 
Working on 10.8.4 ML haven't tested on 10.7 sorry...

tandri79 06-22-2013 04:17 PM
Re: eucon 3.0 crashes
 
What do you think about this update? is it working better for you than 2.7.1?

smfelton 06-22-2013 05:46 PM
Re: eucon 3.0 crashes
 
So far it seems very good, connects quickly, and so far connects every time. Also I have had no dropped connection yet, though to be fair they were very occasional with 2.7.1. Early days yet......

Xill 06-23-2013 07:52 AM
Re: eucon 3.0 crashes
 
I have a dream:
Installs Eucon 3.0
power on units
start logic
ta-dam! it works....

Reality: Well it seems to be an improvement over 2.71. 3 out of 4 units connected to Eucon and the connection to Logic was established. For some reason it seems that one of my units never works with Eucon (it is in the list but cannot be added) unless I power it on before the computer.

OMG I tried to changed that unit to a static IP and discovered it was already set-up that way. Setting it up to DHCP fixed my 2 year long problem... Obviously it was an unit on display and the geeks at the store had set it up to static. DUH!

jjnssn 06-23-2013 08:11 AM
Re: eucon 3.0 crashes
 
Quote:
Originally Posted by tandri79 (Post 2051475)
Just downloaded eucon 3.0 and when the program tries to boot up it crashes.

I have tried to repair permissions, thrashed preferences and nothing works.

If I go back to 2.7.1 everything is ok

my system is osx 10.7.5 on a mac pro 5.1

Has anyone got 3.0 to work?

Do you guys have any suggestions what to try next?

here is a part of the crash log. I cant post the whole log cause its to long but this was something I think is causing the problem.

Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
I had it crash with PT11 last night. Will be working with it again today.

Xill 06-23-2013 10:08 AM
Re: eucon 3.0 crashes
 
Quote:
Originally Posted by Xill (Post 2052054)
I have a dream:
Installs Eucon 3.0
power on units
start logic
ta-dam! it works....

Reality: Well it seems to be an improvement over 2.71. 3 out of 4 units connected to Eucon and the connection to Logic was established. For some reason it seems that one of my units never works with Eucon (it is in the list but cannot be added) unless I power it on before the computer.

OMG I tried to changed that unit to a static IP and discovered it was already set-up that way. Setting it up to DHCP fixed my 2 year long problem... Obviously it was an unit on display and the geeks at the store had set it up to static. DUH!
Well I restarted the consoles again, this time they wont connect to Logic but stay locked on Firefox even if the application is not running.

Edit: Restarting Eucon fixed it. I'm quite glad I do not have to restart the computer everytime now.

mal777 06-24-2013 01:24 PM
Re: eucon 3.0 crashes
 
Had no issues with 3.0 and PT11 here. All seems to be running perfectly :-)


All times are GMT -7. The time now is 10:19 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com