MIDI notes continue sounding even after stop the record
 

Hi friends, I need your help, I have a Co-Install Pro Tools 10.3.9 and 12.3 protools
In the protools 10.3.9 when playing a midi, assigning the midi out to Roland Fantom x6 as midi controller, protools crashes, and crashes pc
In protools 12.3 when playing a midi, assigning the midi out to Roland Fantom x6 as a MIDI controller, the pasted notes remain
. Some MIDI notes continue sounding even after stop the record
I've tried changing the USB cable, I used another controller midi yahama, and still the same problem

Re: MIDI notes continue sounding even after stop the record
 

"Common" issue with Midi devices, hit-panic button, or program one to your midi controller.
All notes off.
Cc123 value 0.

All sound off
Cc120 value 0.
https://www.midi.org/specifications/...midi-message#3

Usually caused by too much Midi information, active sensing, MTC, MMC, etc...
Or a bad timing clock.
Or radio/electric noise in the signal.
Or a dirty power supply,
Or a midi feedback/Loop.
Or a bad ground "in the cable." Or the synth, etc...

https://en.wikipedia.org/wiki/Panic_button#MIDI

Midi USB is not the best, specially in W7.
But there are plenty other options. Available.

Re: MIDI notes continue sounding even after stop the record
 

Hi Marcos !

What audio interface are you using ? Do you have the lastest driver installed ?

Re: MIDI notes continue sounding even after stop the record
 

Welcome to the forum. You can silence stuck MIDI notes in PT by choosing Event > All MIDI Notes Off. There's also the key command Control+Shift+Period (.) (Windows) or Command+Shift+Period (.) (Mac) for the All MIDI Notes Off command.

Hope that helps.

Shane

Re: MIDI notes continue sounding even after stop the record
 

Hello friends, thank you very much for your answers, I tried protools, the key command Control + Shift + Period (.), My driver fantomx6 silence stuck MIDI notes, however when I return midi recording and playback, the problem returns = / I clean my pc power supply, I checked all my wiring interface, I change the MIDI cable and wires auido, but the problem persists, I tried my midi controller in the reaper version 5.15, and I have no problem midi in that program, the problem is only in version 12.3 of protools ..:confused:

Re: MIDI notes continue sounding even after stop the record
 

my interface it is Digidesign 003 Rack
Hello friends, thank you very much for your answers, I tried protools, the key command Control + Shift + Period (.), My driver fantomx6 silence stuck MIDI notes, however when I return midi recording and playback, the problem returns = / I clean my pc power supply, I checked all my wiring interface, I change the MIDI cable and wires auido, but the problem persists, I tried my midi controller in the reaper version 5.15, and I have no problem midi in that program, the problem is only in version 12.3 of protools ..

Re: MIDI notes continue sounding even after stop the record
 

Can you unistall your current driver and install this one please :

http://secure.digidesign.com/service...&localeCode=en

There is a know bugs with the 003 drivers and this driver fix them all. Remember to trash prefences after the new driver installation . It doesnt hurt to try :-) !

Re: MIDI notes continue sounding even after stop the record
 

Have you got Local Off turned on on your keyboard?