MBox Pro 3 Tuner Issue
 

I have a guitar plugged into Line 2 of the unit. Everything seems to be working fine, I have signal into my Eleven plugin in PT9, I can see and hear the signal coming in and going out of the Mbox pro the way I have configured, but there is no signal into the Tuner when I open that window. It is a minor annoyance, but it would nice to be able to use the tuner. I didn't find any instances of this issue here. MBox pro is working fine otherwise.

System is below, any ideas? Thanks-

-dj

MBox 3 pro guitar tuner - can't access it
 

Hi everyone,

I have never been able to access the guitar tuner from my MBox 3 pro by simultaneously holding the dim and mono switch as instructed in the manual. Has anyone else had this problem? Am I doing something wrong?

Thank for any help you might be able to give!

MBox3 Pro dsp effects
 

How do I get the dsp effects to work on my Mbox3 pro? Do I have to be running PT for this to work? Trying to simply put effects on Mic 1 input...don't hear any effects even though they are turned up on the control panel? Must be doing something wrong?
Thanks

Re: MBox3 Pro dsp effects
 

Make sure the "FX Returns" knobs, located under the master volume, are also turned up. You can leave these at full gain and just adjust the individual channels' knobs.

Re: MBox3 Pro dsp effects
 

Yes...they are turned up?

Re: MBox3 Pro dsp effects
 

Hmmmm.....
Have you double checked that the mix that you are adjusting is the one you are listening to?
Say for example maybe you are adjusting "stereo mix 1" or something when you are monitoring through headphones A that are set to "stereo mix 5" or any other stereo mix.

Re: MBox3 Pro dsp effects
 

Yea...I just have 1 mic plugged into XLR Chan 1...I'm getting audio...even able to record and everything...but do not hear any effects coming from the MBOX? Outputs 1/2 has speaker next to it...Stereo Mix 1...Headphones A set to Stereo Mix 1? FX Returns turned up....Volume on Effects turned up under Effects section on control panel as well as for Channel 1? Thanks for your input...this is driving me nuts...:)

Re: MBox3 Pro dsp effects
 

I'm stumped. Make sure you are using the latest drivers:
http://avid.force.com/pkb/articles/e...nload/en375655
I'd install the unit on another computer and see if the DSP still does not function. If not, I'd return it or contact Avid. Can you give some system details? Also what effect are you trying to use?

Re: MBox3 Pro dsp effects
 

Well..just got off the phone with Avid...they don't know either...weird...he did mention it might be a Mountain Lion issue? I'm grabbing an older version of the OS I have as a spare and am going to try it with that to see if it works...if not...back to Avid support...thanks for your help....

Re: MBox3 Pro dsp effects
 

Ok. Let us know what happens, as this might be useful info for mbox pro users interested in upgrading to Mountain Lion.